SRC3.5Y Shank 3.5'' Reverse Circulation Bit For Reverse Circulation RC Drilling
Product Introduce:
The Reverse Circulation line of hammers are used in a wide range of drilling rigs in various geological formations. They are preferred by on-site geologists for their high percentage of uncontaminated sampling; their fast penetration rates; and their trouble-free, low-cost, and long life performance. The pride of workmanship and outstanding engineering make these hammers a superior value. Excellent dependability, service, and support.
Adavantages:
Highly cost efficient
Outstanding engineering and manufacturing
Increased longevity means lower cost per meter
The option of diamond-enhanced carbide bits for deep and abrasive drilling conditions, with no bits sharpening required
Specification:
SOLLROC RC BIT model SRE531:
|
Diameter
|
Buttons * button diameter
|
Button angle
|
Flushing holes
|
Shroud diameter (mm)
|
weight (kg)
|
|
mm
|
inch
|
Gauge
|
Centre
|
|
92
|
3 5/8
|
6*14mm
|
6*12mm
|
35
|
2
|
90
|
6.1
|
|
95
|
3 3/4
|
6*14mm
|
6*12mm
|
35
|
2
|
93
|
6.3
|
About us:
SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.
Delivery Way:
By Air, By express or By Sea
Package :
Ply-wooden cases + pallet
Product Tags:
|
|
SRC3.5Y Shank 3.5" Reverse Circulation Bit For Reverse Circulation RC Drilling Images
|
